Charlie Test Recording [OK]

All languages: post your test recording here. Help check audio files.
Post Reply
Clauffer
Posts: 8
Joined: April 19th, 2024, 10:00 am
Location: Louisville, KY

Post by Clauffer »

sjmarky
Posts: 4716
Joined: August 28th, 2006, 8:47 pm
Location: Sacto CA
Contact:

Post by sjmarky »

Welcome Charlie

I reviewed your test sample, and while it sounds good there are some technical changes needed. LibriVox requires audio that is 128kbps constant bit rate MP3, 44.1kHz sample rate, mono, and between 86dB and 92dB, preferably 89-90. Your test audio settings are all correct, except the volume which is too low at 85.3dB.

Make sure input gain slider in Audacity (upper right with the little mic icon) is well to the right. Then adjust the input gain on your mic so your raw recording has wave forms that peak at about the 0.5 marks in the Audacity window:
Image

If necessary, adjust the volume level before exporting by going to Effects>Amplify and enter an amount.

You can pre-check your audio yourself by downloading the free Checker app: https://cgjennings.ca/projects/checker/
Passed with Warnings is a fail with regard to volume.

Please make a new test recording and post it in a reply to this message. I will come back and review it for you.
"Bringing you yesterday's tomorrow...today!"

My website
My Librivox reader page
Clauffer
Posts: 8
Joined: April 19th, 2024, 10:00 am
Location: Louisville, KY

Post by Clauffer »

Thanks for the advice on the checker and amplifying! I think everything should be good now but please let me know if there are any further adjustments that should be made. Thanks!

https://librivox.org/uploads/tests/test_clauffer.mp3
sjmarky
Posts: 4716
Joined: August 28th, 2006, 8:47 pm
Location: Sacto CA
Contact:

Post by sjmarky »

Perfect. You are good to go.

Happy narrating!
"Bringing you yesterday's tomorrow...today!"

My website
My Librivox reader page
Post Reply