Hello! Here is my one minute test.
Recording on an xlr (rode NT1) and DAW is Studio One.
This file is raw.
Thank you for your feedback!
https://librivox.org/uploads/tests/test_courtneyfab.mp3
One Minute Test [OK]
Welcome Courtney
I reviewed your test sample, and while it sounds good there are some technical changes needed. LibriVox requires audio that is 128kbps constant bit rate, 44.1kHz sample rate, mono, and between 86db and 92db, preferably 89-90. Your test audio is 320kbps, and the volume is right at the max at 92db
You can pre-check your audio yourself by downloading the free Checker app: https://cgjennings.ca/projects/checker/
Passed with Warnings is a fail with regard to volume.
Please make a new test recording and post it in a reply to this message. I will come back and review it for you.
I reviewed your test sample, and while it sounds good there are some technical changes needed. LibriVox requires audio that is 128kbps constant bit rate, 44.1kHz sample rate, mono, and between 86db and 92db, preferably 89-90. Your test audio is 320kbps, and the volume is right at the max at 92db
You can pre-check your audio yourself by downloading the free Checker app: https://cgjennings.ca/projects/checker/
Passed with Warnings is a fail with regard to volume.
Please make a new test recording and post it in a reply to this message. I will come back and review it for you.
-
- Posts: 2
- Joined: November 14th, 2023, 9:40 am
Thanks @sjmarky!
I think I've fixed the issues. Put it through Checker and it passed. Thanks for your help!
https://librivox.org/uploads/tests/test_courtneyfab.mp3
I think I've fixed the issues. Put it through Checker and it passed. Thanks for your help!
https://librivox.org/uploads/tests/test_courtneyfab.mp3
Okay, you are good to go.
Happy narrating!
Happy narrating!