https://librivox.org/uploads/tests/testaradiad.mp3
Thank you so much for taking the time to critique my recording.
I hope everyone has a great day
Test AradiaD
Welcome Aradia
I reviewed your test sample, and while it sounds good there are some technical changes needed. LibriVox requires audio that is 128kbps constant bit rate MP3, 44.1kHz sample rate, mono, and between 86db and 92db, preferably 89-90. Your test audio is 224kbps and in stereo. The volume is perfect.
When exporting your MP3 from Audacity, be sure to check Bit Rate Mode - Constant, then select 128kb from the pull-down menu, and check Force Export to Mono.
You can pre-check your audio yourself by downloading the free Checker app: https://cgjennings.ca/projects/checker/
Passed with Warnings is a fail with regard to volume.
Please make a new test recording and post it in a reply to this message. I will come back and review it for you.
I reviewed your test sample, and while it sounds good there are some technical changes needed. LibriVox requires audio that is 128kbps constant bit rate MP3, 44.1kHz sample rate, mono, and between 86db and 92db, preferably 89-90. Your test audio is 224kbps and in stereo. The volume is perfect.
When exporting your MP3 from Audacity, be sure to check Bit Rate Mode - Constant, then select 128kb from the pull-down menu, and check Force Export to Mono.
You can pre-check your audio yourself by downloading the free Checker app: https://cgjennings.ca/projects/checker/
Passed with Warnings is a fail with regard to volume.
Please make a new test recording and post it in a reply to this message. I will come back and review it for you.
Okay, now the other settings are correct, but the volume is too high at 95.7db.
Make sure the the input gain slider in Audacity (upper right with the little mic icon) is well to the right. Then adjust the input gain on your mic so your raw recording has wave forms that peak at about the 0.5 marks in the Audacity window:
If necessary, adjust the volume level before exporting by going to Effects>Amplify.
Do run your audio through Checker before uploading. It will save you a lot of time.
Another test, please.
Make sure the the input gain slider in Audacity (upper right with the little mic icon) is well to the right. Then adjust the input gain on your mic so your raw recording has wave forms that peak at about the 0.5 marks in the Audacity window:
If necessary, adjust the volume level before exporting by going to Effects>Amplify.
Do run your audio through Checker before uploading. It will save you a lot of time.
Another test, please.