Page 1 of 2

Punch & Roll tutorial videos

Posted: June 26th, 2019, 10:59 am
by philchenevert
I've been asked to make a tutorial for this procedure but, sadly, I don't use it. So where are the videos on how to do this now that Audacity has it built in. Thanks.

Re: Punch & Roll tutorial videos

Posted: June 26th, 2019, 12:22 pm
by Peter Why
I don't use punch and roll, either, but mightyfelix demonstrated it in a Twitch video: https://www.twitch.tv/videos/396441804

Peter

Re: Punch & Roll tutorial videos

Posted: June 26th, 2019, 3:39 pm
by philchenevert
Peter Why wrote:
June 26th, 2019, 12:22 pm
I don't use punch and roll, either, but mightyfelix demonstrated it in a Twitch video: https://www.twitch.tv/videos/396441804

Peter
Thanks Peter.

Re: Punch & Roll tutorial videos

Posted: June 26th, 2019, 3:55 pm
by KevinS
Many rave about it. I wish you well, Phil, and anxiously await your teaching.

Re: Punch & Roll tutorial videos

Posted: June 26th, 2019, 7:24 pm
by mightyfelix
Oh, thank you, Peter! When I saw the title of this thread, I was going to provide a link to my video, but you've done it for me! :9:

I've been using Punch and Roll for a few months now, and it has greatly reduced my editing time, without significantly increasing my recording time. I think it's a wonderful feature. If you prefer to have multiple takes of a phrase and then choose between them afterwards, it wouldn't help, but it's great for cutting out obvious errors on the front end.

If I recall, my video was a bit long, because I was doing an interactive demonstration. I also demonstrated the use of macros in Audacity. If there is interest, I can make another video which would be more short and to the point, just on Punch and Roll.

Re: Punch & Roll tutorial videos

Posted: June 27th, 2019, 9:42 am
by philchenevert
If I recall, my video was a bit long, because I was doing an interactive demonstration. I also demonstrated the use of macros in Audacity. If there is interest, I can make another video which would be more short and to the point, just on Punch and Roll.
You bet we are interested! A video dedicated to just this process would be an excellent addition. Who knows, I may start using it myself. So please do make one if you have time. :thumbs:

Re: Punch & Roll tutorial videos

Posted: June 27th, 2019, 10:27 am
by KevinS
Hear, hear!

Re: Punch & Roll tutorial videos

Posted: June 28th, 2019, 10:42 am
by mightyfelix
I'll try to do one Sunday afternoon. :thumbs: I'll post a link here when it's finished.

Re: Punch & Roll tutorial videos

Posted: June 30th, 2019, 9:53 pm
by mightyfelix
Well, it looks like Twitch, which I've used for my live videos, will no longer allow me to upload pre-recorded videos, so that's kinda silly. Anyway, I have an old dusty forgotten YouTube account, and I was able to put it up there.

Punch and Roll:
https://youtu.be/odJhQd-y9UU

(Sorry for the awful picture quality. I don't know what happened there. Hopefully you can still see what's going on. :? )

Re: Punch & Roll tutorial videos

Posted: June 30th, 2019, 9:59 pm
by mightyfelix
Ugh no, sorry. This is a new and different process for me, and I'm trying to figure out how to do it. Stand by...

EDIT: I've made the needed changes, including, I think, improved video quality. But YouTube says it will take a few hours to take effect. So expect a link in the morning.

Re: Punch & Roll tutorial videos

Posted: July 1st, 2019, 7:19 am
by philchenevert
Thanks for the added effort Devorah. Future recorders and editors will thank you!

Re: Punch & Roll tutorial videos

Posted: July 1st, 2019, 9:31 am
by mightyfelix

Re: Punch & Roll tutorial videos

Posted: July 1st, 2019, 10:42 am
by philchenevert
mightyfelix wrote:
July 1st, 2019, 9:31 am
Success!

https://youtu.be/K1_Gti3lHaM
I will add this to link our Wiki if you don't mind. Lots of people are interested in this.

Re: Punch & Roll tutorial videos

Posted: July 1st, 2019, 1:06 pm
by mightyfelix
Go right ahead!

Re: Punch & Roll tutorial videos

Posted: July 1st, 2019, 5:52 pm
by philchenevert
mightyfelix wrote:
July 1st, 2019, 1:06 pm
Go right ahead!
It has been added to everal boards viewtopic.php?f=23&t=33439&p=1604678#p1604678 and to the main wiki page of videos. Cool and excellent video by the way. :clap: