Post your questions & get help from friendly LibriVoxers
Post Reply
Posts: 10
Joined: March 31st, 2017, 12:55 pm

Post by Wanita » April 20th, 2017, 12:20 pm

How does a person set up another mc to upload finished readings?

LibriVox Admin Team
Posts: 6948
Joined: May 14th, 2012, 5:09 am
Location: in the sun

Post by kathrinee » April 20th, 2017, 2:13 pm


The first post in the project you are participating in will tell you who the mc for that project is. If you look almost at the end of the post, just a few lines below the link to the uploader and where the username/password for the uploader, there should be a (blue) line saying something like "You'll need to select the MC, which for this project is [name]."

Can you see it? :)

Maybe I didn't answer your question -- if so, please try asking it again :thumbs:

~~ Thanks for your patience! Please feel free to send me a PM if you feel that I'm neglecting you ~~

Fairytales in Danish, Swedish, or Norwegian

LibriVox Admin Team
Posts: 28313
Joined: April 3rd, 2008, 3:55 am
Location: Melbourne,Australia

Post by annise » April 20th, 2017, 3:19 pm

expanding a bit. Looks like to are reading for viewtopic.php?f=9&t=64634 . Just look at the first post and find out what you need to read at the beginning and end, what your file needs to be called at right nesr the bottom whose name you need to use for the uploader. You can always ask questions in that thread if something isn't clear, each project (book) is a little bit different.
Hope this helps - we were all new once :D
Our objective is to make all books in the public domain available, for free, in audio format on the internet. - Hugh McGuire.

Posts: 6579
Joined: April 1st, 2011, 5:36 pm
Location: Kelsingra

Post by Elizabby » April 21st, 2017, 4:53 am

Or if you want to start a new project, you post the project in the launch pad and wait for an MC to come along and pick it up!

Post Reply