One Minute Test - Liza Fox

All languages: post your test recording here. Help check audio files, provide editing services, and advertise for proof-listeners.
Post Reply
Posts: 12
Joined: February 29th, 2020, 6:45 am

Post by LizaFox » March 1st, 2020, 5:56 pm

Good Evening,

This is a link for my one minute test. I welcome feedback :D .

I am looking forward to becoming a part of this amazing project and building experience in the field of audio narration.

Thank you,
Liza Fox
Liza R. Fox

Algy Pug
Posts: 6056
Joined: December 26th, 2009, 10:07 pm
Location: Perth, Western Australia

Post by Algy Pug » March 2nd, 2020, 12:43 am

Hi Liza

I ran the checker on your sample and it came up with the following errors:

1) The file name should use all lower case letters.
2) The bit rate should be 128 kbps rather than 320 kbps
3) The recording should be in mono sound, not stereo sound.
4) The volume falls outside of the target range (86–92 dB) - yours was 94 db.

You can download the Checker programme (which is free) here:

There were also a few plosives. The wiki has a discussion on this subject:

The noise floor was also a little high (-34 dB). Please check the following wiki page for information about noise removal:

You do have a pleasing and well-modulated voice.

I would also suggest that you remove your email address from your posts in order to deter scammers.

Algy Pug

My Librivox page

Let me recapitulate backwards to what happened previously.
- Rex Mossop

Post Reply